WMI Stage 1 Turbo w/o Tank Kit

This kit without a tank, but with tank fitting& in-tank filter.

Stage 1 Turbo: Single-stage flow based on the value from the Boost Switch.

Water/ Methanol Injection pump has no pressure cut off switch for eliminating any oscillation/pulsation. Internally bypasses for a smooth constant even flow at the nozzle.

All metal equipment has the durability to corrosion of methanol and water, which constitute corrosion impact-resistant nickel-plated brass, brass and EPDM grade plastic material.

All of our products are guaranteed for 2 years against the fabricated problem from the date of receipt by you.

Nozzles have a flow rating of your choice:

125 – 188 – 207 -247 – 288 – 328 – 369 ml/min or 2 – 3 – 3.3 – 3.9 – 4.6 – 5.2 – 5.8 GPH 

%100 water: 0,5cc/HP

%50-50 methanol/ water mixture: 1cc/HP

%100 methanol/ water mixture: 2cc/HP

If you did not specify the size, we sent you a 247 ml/min. (3.9GPH).

The box contains:

1. High-Pressure Diaphragm pump
2. 2 x 3/8th NPT to ¼” compression type fitting
3. Nozzle
4. Nozzle mounting bung
5. 40-micron stainless steel filter
6. Filter nut
7. 1/8th NPT to ¼” compression type elbow female fitting
8. Boost switch
9. 1/8th NPT to ¼” compression type female fitting
10. Controller with wiring loom
11. 20 FT/ 6 meter ¼” OD. red injection hose
12. ¼” plastic Tee compression fitting for vacuum line
13. Fuse holder
14. 5 Amp fuse
15. LED holder
16. On/ Off button
17. 4*Fully insulated female cable connector
18. Fully insulated Ground cable connector
19. 5*zip tie
20. 4*screw for the controller
21. 2*screw and 2*washer for tank
22. 4*screw and 4*washer for pump
23. 3d sticker
24. 8,5*4,5cm sticker
25. 2 x 5*2,5cm sticker
26. Installation manual