WMI Stage 1 Turbo

$270.68

Water/ Methanol Injection Kit benefits:

  • Decrease the manifold temperature.
  • Prevent from melting the pistons by decreasing EGT.
  • Increasing the total number of octane prevents knocking.
  • Increase the dynamic compression.
  • Increase in combustion efficiency.
  • Reduces carbon monoxide (CO) emissions.
  • Reduces carbon dioxide (CO2) emission.
  • Reduces NOx emissions.
  • Reduces HC emissions.

Water-Methanol Injection Kit features:

  • When the pump start, led turn on and you can set the desired level.
  • The kit has the latest technology digital equipment.
  • Electronically controlled pump controller.
  • All parts produced by methanol durable materials.
  • Easy installation with special plugs.
  • Optional transfer pump offers up to use.
  • Optional horizontal float switch.

Download WMI Stg1 Turbo – EN Pdf

In stock

Category:
Description
Additional information
Reviews (0)

Stage 1 Turbo: Single-stage flow based on the value from the Boost Switch.

Water/ Methanol Injection pump has no pressure cut off switch for eliminating any oscillation/pulsation. Internally bypasses for a smooth constant even flow at the nozzle.

All metal equipment has the durability to corrosion of methanol and water, which constitute corrosion impact-resistant nickel-plated brass, brass and EPDM grade plastic material.

All of our products are guaranteed for 2 years against the fabricated problem from the date of receipt by you.

Nozzles have a flow rating of your choice:

125 – 188 – 207 -247 – 288 – 328 – 369 ml/min or 2 – 3 – 3.3 – 3.9 – 4.6 – 5.2 – 5.8 GPH 

%100 water: 0,5cc/HP

%50-50 methanol/ water mixture: 1cc/HP

%100 methanol/ water mixture: 2cc/HP

If you did not specify the size, we sent you a 247 ml/min. (3.9GPH).

The box contains:

  1. High-Pressure Diaphragm pump
  2. 2 x 3/8th NPT to ¼” compression type fitting
  3. Nozzle
  4. Nozzle mounting bung
  5. 40-micron stainless steel filter
  6. Filter nut
  7. 1/8th NPT to ¼” compression type elbow female fitting
  8. Boost switch
  9. 2 x 1/8th NPT to ¼” compression type female fitting
  10. Controller with wiring loom
  11. 1,15 Gallon/ 4,6 Quart/ 4,3 Liter plastic tank
  12. Plastic tank cap
  13. 1/8th NPT 100-micron in-tank filter
  14. Rubber O-ring
  15. 20 FT/ 6 meter ¼” OD. red injection hose
  16. ¼” plastic Tee compression fitting for vacuum line
  17. Fuse holder
  18. 5 Amp fuse
  19. LED holder
  20. On/ Off button
  21. 4*Fully insulated female cable connector
  22. Fully insulated Ground cable connector
  23. 5*zip tie
  24. 4*screw for the controller
  25. 2*screw and 2*washer for tank
  26. 4*screw and 4*washer for pump
  27. 3d sticker
  28. 8,5*4,5cm sticker
  29. 2 x 5*2,5cm sticker
  30. Installation manual
Dimensions 35 × 25 × 15 cm

Reviews

There are no reviews yet.

Be the first to review “WMI Stage 1 Turbo”
Open chat