WMI Stage 2 RPM

Stage 2 RPM: Single-stage flow based on the value from the RPM module.

Water/ Methanol Injection pump has no pressure cut off switch for eliminating any oscillation/pulsation. Internally bypasses for a smooth constant even flow at the nozzle.

All metal equipment has the durability to corrosion of methanol and water, which constitute corrosion impact-resistant nickel-plated brass, brass and EPDM grade plastic material.

All of our products are guaranteed for 2 years against the fabricated problem from the date of receipt by you.

Nozzles have a flow rating of your choice:

125 – 188 – 207 -247 – 288 – 328 – 369 ml/min or 2 – 3 – 3.3 – 3.9 – 4.6 – 5.2 – 5.8 GPH 

%100 water: 0,5cc/HP

%50-50 methanol/ water mixture: 1cc/HP

%100 methanol/ water mixture: 2cc/HP

If you did not specify the size, we sent you a 247 ml/min. (3.9GPH).

The box contains:

1. High-Pressure Diaphragm pump
2. 2 x 3/8th NPT to ¼” compression type fitting
3. Nozzle
4. Nozzle mounting bung
5. 40-micron stainless steel filter
6. Filter nut
7. 1/8th NPT to ¼” compression type elbow female fitting
8. RPM module
9. Controller with wiring loom
10. 1,15 Gallon/ 4,6 Quart/ 4,3 Liter plastic tank
11. Plastic tank cap
12. 1/8th NPT 100-micron in-tank filter
13. Rubber O-ring
14. 1/8th NPT to ¼” compression type female fitting
15. 20 FT/ 6 meter ¼” OD. red injection hose
16. Fuse holder
17. 5 Amp fuse
18. On/ Off button
19. 4*Fully insulated female cable connector
20. Fully insulated Ground cable connector
21. 5*zip tie
22. 4*screw for the controller
23. 2*screw and 2*washer for tank
24. 4*screw and 4*washer for pump
25. 3d sticker
26. 8,5*4,5cm sticker
27. 2 x 5*2,5cm sticker
28. Installation manual