WMI Stage 1.5 TD

$343.25

Water/ Methanol Injection Kit benefits:

  • Decrease the manifold temperature.
  • Prevent from melting the pistons by decreasing EGT.
  • Increasing the total number of octane prevents knocking.
  • Increase dynamic compression.
  • Increase in combustion efficiency.
  • Reduces carbon monoxide (CO) emissions.
  • Reduces carbon dioxide (CO2) emission.
  • Reduces NOx emissions.
  • Reduces HC emissions.

Water-Methanol Injection Kit features:

  • When the pump start, led turn on and you can set the desired level.
  • The kit has the latest technology digital equipment.
  • Electronically controlled pump controller.
  • All parts produced by methanol durable materials.
  • Easy installation with special plugs.
  • Optional transfer pump offers up to use.
  • Optional horizontal float switch.

Download WMI Stg1.5+ Turbo LCD – EN Pdf

Download WMI Stage 1.5+ TD LCD – EN Pdf

Clear
SKU: N/A Category:
Description
Additional information
Reviews (0)

Stage 1.5 Turbo-Diesel: The all-new stage 1.5 water-methanol injection controller from Bosphorus Innovations gives you the benefits of a boost gauge and water-methanol controller/ fail-safe all in one!  The new controller comes with a built-in 10 bar/ 145 psi manifold absolute pressure sensor. That allows you to set water-methanol in desired boost pressure. The injection stage is adjustable to match what the engine requires.

The new white and red dual-tone color LCD screen shows boost, injection, test mode, fault codes, setting response time, resolution, fine adjustment, power saving mode, lock the keys, and output modes in a bright easy to read screen.

The water/ Methanol Injection pump has no pressure cut-off switch for eliminating any oscillation/pulsation. Internally bypasses for a smooth constant even flow at the nozzle.

All metal equipment has the durability to corrosion of methanol and water, which constitute corrosion impact-resistant nickel-plated brass, brass, and EPDM grade plastic material.

All of our products are guaranteed for 2 years against the fabricated problem from the date of receipt by you.

Nozzles have a flow rating of your choice:

95cc / 125cc / 157cc / 189cc /  220cc / 252cc / 283cc / 315cc / 378cc / 378cc / 440cc / 504cc / 567cc / 630cc / 755cc / 880cc / 1000cc / 1130cc / 1260cc / 1575cc / 1890cc / 2200cc

1.5 GPH | 2 GPH | 2.5 GPH | 3 GPH | 3.5 GPH | 4 GPH | 4.5 GPH | 5 GPH | 6 GPH | 7 GPH | 8 GPH | 9 GPH | 10 GPH | 12 GPH | 14 GPH | 16 GPH | 18 GPH | 20 GPH | 25 GPH | 30 GPH | 35 GPH

Nozzles have a flow rating of your choice:

100% Water:  10-15% Water/ Fuel ratio or 0.5-1cc per HP

%50-50 Water-Methanol: 15-20% W-M/ Fuel ratio or  1-1.5cc per HP

100% Methanol: 20-25% Methanol/ Fuel ratio or 1.5-2cc per HP

Please indicate which nozzle size and color of hose you prefer before the order item. If you don’t specify the size, we will send you a 252 ml/min (4 GPH) nozzle and Red Hose.

Included:

  1. High-Pressure Diaphragm pump
  2. 2 x 3/8″ NPT – ¼” compression type pump fitting
  3. Nozzle
  4. 40-micron stainless steel filter
  5. Nozzle mounting bung
  6. Check valve
  7. 1/8″ NPT – ¼” compression type hose fitting
  8. Gauge Controller
  9. 5mm – 1/4″ elbow hose fitting for gauge
  10. 1/4″ Tee for vacuum/ boost source
  11. Controller with wiring loom
  12. 1,15 Gallon/ 4,6 Quart/ 4,3 Liter plastic tank
  13. Plastic tank cap
  14. 1/8″ NPT – ¼” compression type tank fitting
  15. 20 FT/ 6 meter ¼” OD. injection hose
  16. 2*Fully insulated butt cable connector
  17. Fully insulated Ground cable connector
  18. 5*zip tie
  19. 2*screw and 2*washer for tank
  20. 4*screw and 4*washer for pump
  21. 3d sticker
  22. 8,5*4,5cm sticker
  23. 2 x 5*2,5cm sticker
  24. Installation manual
Dimensions 35 × 25 × 15 cm
Hose Color

Red, Blue

Nozzle Size

95cc / 1.5 GPH, 125cc / 2 GPH, 157cc / 2.5 GPH, 189cc / 3 GPH, 220cc / 3.5 GPH, 252cc / 4 GPH, 283cc / 4.5 GPH, 315cc / 5 GPH, 378cc / 6 GPH, 440cc / 7 GPH, 504cc / 8 GPH, 567cc / 9 GPH, 630cc / 10 GPH, 755cc / 12 GPH, 880cc / 14 GPH, 1000cc / 16 GPH, 1130cc / 18 GPH, 1260cc / 20 GPH, 1575cc / 25 GPH, 1890cc / 30 GPH, 2200cc / 35 GPH

Reviews

There are no reviews yet.

Be the first to review “WMI Stage 1.5 TD”
Open chat