WMI Stage 3 ECU

Name: WMI Stage 3 ECU
SKU: 8111
Availability: InStock

$250.38 – $468.12

Water/ Methanol Injection Kit benefits:

Decrease the manifold temperature.
Prevent from melting the pistons by decreasing EGT.
Increasing the total number of octane prevents knocking.
Increase dynamic compression.
Increase in combustion efficiency.
Reduces carbon monoxide (CO) emissions.
Reduces carbon dioxide (CO2) emission.
Reduces NOx emissions.
Reduces HC emissions.

Water-Methanol Injection Kit features:

When the pump start, the led turn on, and you can set the desired level.
The kit has the latest technology and digital equipment.
Electronically controlled pump controller.
All parts are produced from durable methanol materials.
Easy installation with special plugs.
Optional transfer pump offers up to use.
Optional horizontal float switch.

Instruction Manual

Hose Color & Type

Tank Size

Mounting Method

Clear

SKU: N/A Categories: Forced Induction Gasoline, Naturally Aspirated Gasoline

Description

Additional information

Stage 3 ECU: The kit is controlled via a Standalone ECU. You can program the system based on TPS, MAP, or Engine Load. The flow can be a single stage.

The water/ Methanol Injection pump has no pressure cut-off switch to eliminate oscillation/pulsation. Internally bypasses for a smooth constant even flow at the nozzle.

All metal equipment has the durability to corrosion of methanol and water, which constitute corrosion impact-resistant nickel-plated brass, brass, and EPDM grade plastic material.

All of our products are guaranteed for 2 years against the fabricated problem from the date of receipt by you.

Nozzles have a flow rating of your choice:

95cc / 125cc / 157cc / 189cc / 220cc / 252cc / 283cc / 315cc / 378cc / 378cc / 440cc / 504cc / 567cc / 630cc / 755cc / 880cc / 1000cc / 1130cc / 1260cc / 1575cc / 1890cc / 2200cc

1.5 GPH | 2 GPH | 2.5 GPH | 3 GPH | 3.5 GPH | 4 GPH | 4.5 GPH | 5 GPH | 6 GPH | 7 GPH | 8 GPH | 9 GPH | 10 GPH | 12 GPH | 14 GPH | 16 GPH | 18 GPH | 20 GPH | 25 GPH | 30 GPH | 35 GPH

Nozzles have a flow rating of your choice:

100% Water: 10-15% Water/ Fuel ratio or 0.5-1cc per HP

%50-50 Water-Methanol: 15-20% W-M/ Fuel ratio or 1-1.5cc per HP

100% Methanol: 20-25% Methanol/ Fuel ratio or 1.5-2cc per HP

Please indicate which nozzle size and hose color you prefer before the ordered item. If you don’t specify the size, we will send you a 252 ml/min (4 GPH) nozzle and Red Hose.

Included:

High-Pressure Diaphragm pump
2 x 3/8″ NPT – ¼” compression type pump fitting
Nozzle
40-micron stainless steel filter
Nozzle mounting bung
Check valve
1/8″ NPT – ¼” compression-type hose fitting
Controller with wiring loom
1,15 Gallon/ 4,6 Quart/ 4,3 Liter plastic tank
Plastic tank cap
1/8″ NPT – ¼” compression-type tank fitting
20 FT/ 6 meter ¼” OD. injection hose
2*Fully insulated butt cable connector
Fully insulated Ground cable connector
5*zip tie
2*screw and 2*washer for tank
4*screw and 4*washer for pump
3d sticker
8,5*4,5cm sticker
2 x 5*2,5cm sticker
Installation manual

Weight	3 kg
Dimensions	30 × 25 × 12 cm
Hose Color & Type	Nylon Blue, Nylon Red, PTFE
Tank Size	No Tank, Small Size 3 Lt/ 0.8 Gallon, Standard M Tank 5.9 Lt/ 1.58 Gallon, Low Profile 5 Lt/ 1.32 Gallon, L Tank 10 Lt/ 2.64 Gallon, XL Tank 20 Lt/ 5.28 Gallon
Mounting Method	Standard Mount (For vehicles with large mounting space), Remote Mount (For vehicles with narrow mounting space), V Engine (attached to solenoid with double nozzle hose)